Pixhawk Cube Mount Bracket F550
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Pixhawk Cube (2.1) mount for a F550 Clone. The bolt holes are 3mm to affix the mount to the frame and the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a Pixhawk Cube (2.1) mount for a F550 Clone.
The bolt holes are 3mm to affix the mount to the frame and the standard 2.5mm for the Pixhawk Carrier board itself. I have also included the washers I used in the files as well as the design files. I might change the washers to have a lip to go into the next slot just depends on well they stay there. Enjoy.
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Notes:
I used the standard settings
Post-Printing
Category: R/C Vehicles