Eye Glasses Refrigerator/Toolbox Magnet Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple magnetic glasses holder for the refrigerator or toolbox.
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Super simple but daily used magnetic eye glasses holder for the refrigerator or toolbox.
I was getting tired of looking for a safe spot to put my glasses when getting home and the side of the refrigerator was the perfect spot. This would also work well on the side (or inside) of a toolbox for safety glasses.
The holder uses a 25mm round magnet that is super glued into the base. The magnet I used is definitely overkill (60lb holding force!) as I had some left over from another project. But, they would work well for a toolbox or in the back of a truck or if you have some heavy, thick glasses. The magnets I used can be found on Amazon here:
https://www.amazon.com/gp/product/B07YSTJ4TR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Do not use the screws to secure, super glue the magnet in.
PLA is perfect, 10% infill, no supports.
I used Overture Matte Grass Green PLA as it stands out on my refrigerator.