1 / 2
Pool cleaner deflector ring (suites Zodiac Barracuda Aquasphere)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ring that goes on a creepy crawly to keep it tracking straight.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The deflector on my pool cleaner broke and I thought the prices they were asking for new ones were outrageous, so I designed up my own. It's intended to be used with 6mm wall anchor tube like this.
The tube is PVC which should be fine in a chlorine pool. It looks like ABS or ASA is a good choice for the printed parts, but the photo is PLA (until my ABS filament arrives). :-)
Sizes are based on a 150mm radius. I cut the spokes at about 120mm and the circumference pieces at about 220mm.