Thumb support for motorcycle throttle grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I'm an Africa Twin motorcycle driver and sometimes my hand gets tired from keeping the throttle open during long…
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 1673
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm an Africa Twin motorcycle driver and sometimes my hand gets tired from keeping the throttle open during long highway rides.
I designed this clamp with a support that I can push with my thumb to keep the throttle open. That way my hand can rest for a few minutes without the need to stop driving.
The ring is designed for a grip with diameter 30mm. I assume you can adapt it to any other diameter by resizing the STL on your print board.
Print instructions
The object should be printed with a filament that allows some flexibility (you have to open the ring somewhat to put it into place).
PLA is definitely not the way to go. Personally I used FLEX with high infill in order to get both flexibility and robustness.