1 / 3
Original Shaker Siphon Pump (Drop in glass marble while printing)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shaker Siphon Pump designed to be made with a glass marble dropped in whilst printing. Made for a 13mm glass marble
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 245
- Wydruki
- 1
- Wyświetlenia
- 3125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 4)Remiksy (0)Kolekcje (62)Powiązane
I wanted a siphon pump whilst out adventure riding, i made this one that works with a glass marble dropped in whilst printing. Get some vinyl tubing put it on and it should work for you! Can take a second to get the technique.
Made from PETG
ABS+ or Nylon would work.
0.2mm
4-6walls
20-30% infil
13mm glass marble is what I used
10-15mm tubing should work.
Clear tube allows you to see your progress.