OpenEnergyMonitor Photodiode Optical Utility Meter LED Pulse Sensor Housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have opened your OpenEnergyMonitor Photodiode Optical Utility Meter LED Pulse Sensor housing to desolder the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 771
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
If you have opened your OpenEnergyMonitor Photodiode Optical Utility Meter LED Pulse Sensor housing to desolder the LED like me, then you'll need to print a new one.
The OEM sensor housing is glued together, I used a hot air gun to try and disassemble but it's didn't come apart and the housing itself melted (as shown in the photos).
I removed the pulsing LED on mine because I use the sensor as a TTL input to a LoRaWAN transmitter and every bit of saved battery life counts.
Print Settings
Printer Brand:
Anycubic
Printer:
All-metal Mega
Rafts:
No
Supports:
No
Infill:
5%
Filament:
3DFillies PLA+
Black
Category: Electronics