1 / 2
Creality Sonic Pad - G-Sensor Bed Mount (clip on) — zdjęcie 1
1 / 2

Creality Sonic Pad - G-Sensor Bed Mount (clip on)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bed mount for the Creality Sonic Pad G-sensor so Y-axis input shaping can be tested. Attachable with binder clips.

Ocena
5 / 5
Polubienia
43
Pobrania
557
Wydruki
5
Wyświetlenia
3165
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is a bed mount that can be used to perform a input shaper test on the bed (Y-axis) using the G-sensor included with the Creality Sonic Pad. it is designed to be used on a corner of the bed using binder clips on two sides in order to securely attach it. At 100% size the mount is 10mm thick to accommodate screws of various lengths.

***** I highly recommend that if the mount is being placed a side of the bed on which the nozzle moves when auto-homing, to auto-home first and then attach the mount to the bed. Otherwise the nozzle may hit the mount in the process of the auto-home and drag it off. I have learned from personal experience, luckily without damage to my PEI sheet :)

Tagi