VESA Monitor Mount (Adapter Plate) for Fujitsu Futro S740 Thin Client Mini PC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows mounting the S740 thin client/mini computer to the backside of a monitor with VESA 100mm mounting holes.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 265
- Wydruki
- 2
- Wyświetlenia
- 2598
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATE: V1.1 has improved pin shape for easier mounting.
I used PETG for printing because some flexibility is needed to make the little arm snap into the Kensington lock hole. 3 perimeters worked well. If you try PLA, please let me know.
Print with brim if you have problems with bed adhesion at the corners. No support needed.
Screws used are M4. Since the backside of my monitor is slightly round in shape, I needed some washers to keep the mounting plate straight. I used a screw length of 15mm, but without washers 8mm would have been enough. There is 3mm room for the screw heads, so a flat profile is needed.
Due to symmetry of VESA, the S740 can be mounted facing in any direction ( left, right, up). There is a marking on the plate for where the front will go.
If you have any remarks, problems, needs for changes etc., please do not hesitate to send a message or write a comment.
All product names, logos, brands, trademarks and registered trademarks are property of their respective owners. All company, product and service names used in this website are for identification purposes only. Use of these names, trademarks and brands does not imply endorsement.