DIY Command Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want to print your own command hooks, well this isn't a command hook, but it is similar and just as effective at…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 93
- Wydruki
- 0
- Wyświetlenia
- 557
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Want to print your own command hooks, well this isn't a command hook, but it is similar and just as effective at holding underwear on the wall. Three designs to fit your needs: a nail based design (shown printed), a magnet based design (12mm x 3mm magnets), and a command strip tape (medium tape i think).
Print Settings
Printer Brand:
Wanhao
Printer:
Duplicator 6
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
50%
Notes:
Printed at 60 mm/s, would go slower for a better hook.
Post-Printing
Had to trim some nubs off the underside of the hook.
How I Designed This
Designed in Autocad
Category: Organization