DtM-v3.1 Face Shield PPE, NO LOGO, Fixed Width, 3 Peg Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For those of you that have printed the NIH approved file and seen very weird artifacts and retractions on the splash…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 470
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Share Alike
For those of you that have printed the NIH approved file and seen very weird artifacts and retractions on the splash gaurd... YOU ARE NOT ALONE. I brought the STEP file into cad and fixed the inconsistent width of the front band and splash guard. I have not altered the front face of this model at all (front pegs surface). The model is the same height and I believe that I have captured the original design intent and have not changed any other geometry on this model. It prints much better than the original NIH model.
Print instructions
I used the same settings that I used to print the original RC3.