Lithobox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A box that nicely illuminates a 100 x 100 mm lithophane. You can easily change lithophane like slides in a projector.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Box
Box was modeled in Autodesk Fusion 360 around Emos LED night light P3310K with motion sensor. Parametric model is provided if you need to adapt it for the different light source.
It consists of two parts that can be disassembled and fit into each other. I print the cover with small supports under the protrusions.
Lithophane
I mainly drew my know-how for creating a lihophane and setting print parameters from this article:
https://blog.prusa3d.com/from-2d-to-3d-how-to-turn-a-picture-or-a-photo-into-a-3d-model_8882/
Used converter settings:
Material
I achieved the best results with Filament PM PLA+ White.
Enjoy!