Classic RC10 Gold Pan Servo Mount Posts Part 6336
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RC10 Gold Pan Servo Mounts These are very simple but necessary. They replace Associated part Number 6366. NOTE: The…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 220
- Wydruki
- 1
- Wyświetlenia
- 576
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
RC10 Gold Pan Servo Mounts
These are very simple but necessary. They replace Associated part Number 6366.
NOTE: The originals required the use of 2 washers under the rear servo mount. See the attached picture from the RC10 Manual. To eliminate the need for these washers, I created a front and rear mount. The rear mount is 2mm taller than the front. If you would like to keep it original using the two washers, then just print two front mounts.
Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me motivated to make more, when I know people are using my designs.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.16
Infill:
40%
Filament:3D Solutech PLA Black
Category: Toys & Games