1 / 2
Losi XXX 2WD R/C Buggy Front A-Arms — zdjęcie 1
1 / 2

Losi XXX 2WD R/C Buggy Front A-Arms

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Front A-Arms for Vintage Losi XXX Buggy. These are not an exact copy of the originals, I tried to keep the same…

Ocena
0 / 5
Polubienia
17
Pobrania
145
Wydruki
0
Wyświetlenia
707
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Front A-Arms for Vintage Losi XXX Buggy.

These are not an exact copy of the originals, I tried to keep the same dimensions and geometry as the originals but they are beefier for a better/stronger 3d printed part. I have printed them, and used them. They do fit and work just fine. The left and right are interchange, but I made both sides so the "Losi XXX" will not be upside-down.. The pivot holes are smaller so you can drill them out for a more precise round fit. You need a 1/8" drill bit for the inside (car side) and 3/32" for the outside (hub side).

Want More Free Designs? Like and Comment! If you enjoy this design, please leave a like and/or a comment. It keeps me motivated to make more, when I know people are using my designs.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.16

Infill:

50%

Filament:3D Solutech PLA Black

Category: R/C Vehicles

Tagi