Bed Level Z-Offset Tests Spiral Circle and Square 200mm 180mm 160mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are Spiral Bed Leveling tests created using an OpenScad File. For Square and Circle Beds of various sizes.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 613
- Wydruki
- 2
- Wyświetlenia
- 1351
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Public Domain
Spiral Bed Level Test
These are Spiral Bed Leveling tests created using an OpenScad File. The OpenScad File is included so you can customize your own Spiral test size.
I use these to set the Z Offset on the fly after auto leveling with a BLTouch / 3D Touch.
I uploaded several different sizes for various beds but feel free to customize as needed. 200mm should avoid bed clips on the standard Ender 3 bed, if you have the center of your bed correct. I suggest using 160mm the first time to be safe. Works well for my Ender 3, Ender 5, CR-10, and Anet A8
Want More Free Designs? Like and Comment!
Instructions:
Load in Cura Slicer and be sure to use these settings:
- Layer Height: 0.2
- Line Width: 0.4
- Infill: 100%
- Build Plate Adhesion: None