Hadley Telescope Lens Cover Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder gives you a safe place to keep all your lens covers when not on the telescope.
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 135
- Wydruki
- 3
- Wyświetlenia
- 996
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
Meant to be used with Tripod Mounting System, this holder gives you a safe place to keep all your lens covers when not on the telescope. Socket head screws feed through the front of the holder and lead out the back. Holder mounts to one of the 2 side mounting points on the Tripod Mounting System.
Holder provides 4 slots to hold 2x mirror covers from Primary Mirror Cover - Remix, the web mirror cover from Mirror and Lens Covers, and a Bahtinov Mask.
I Printed in this PETG.
No Supports needed.
Hardware
4x - #10-24 socket head cap screws
https://www.amazon.com/dp/B081CK132L
4x - #10-24 hex nuts
https://www.amazon.com/dp/B07VBSLDCW