Can Lid (75mm Diameter or 415g, eg Baked Beans)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of my large can lid for my dog food. Also see my TPU versions, Avoid brittle PLA's for this, it needs some flex.…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 159
- Wydruki
- 4
- Wyświetlenia
- 819
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Remix of my large can lid for my dog food. Also see my TPU versions,
Avoid brittle PLA's for this, it needs some flex. If you are using TPU or other flexible filaments you can scale X Y in for a tighter fit. Snaps on perfectly with this PLA+.
Print settings (Cura):
Walls x 3
Top/Bottom x 6
.2mm layer height
.4mm width
210c print
60 c bed
60mm/s
Flow 94% (gives me accurate measurements without any signs of under extrusion)
Coasting enabled
Coasting Volume 0.032 (helps remove the seem)
Fan 0% first layer to 100% at layer 5
No brim or skirt needed
Print Settings
Printer:
Voxelab Aquila S2
Rafts:
Yes
Supports:
No
Resolution:
.2
Filament: eSun PLA+ Orange Post-Printing =============
Category: Containers