Startt / Tronxy-xy100 X-axis Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've created Prusa i3 mk3 inspired x-axis parts for Startt printer. Belts tensioned by X stepper tilt, adjustment by…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 205
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I've created Prusa i3 mk3 inspired x-axis parts for Startt printer.
Belts tensioned by X stepper tilt, adjustment by extra screw pushing on mounting screws
There are 2 versions of idler side part:
x_idler_v3 - Version for 5mm id, 6mm wide bearing idler
x_idler_v3_3mm - Version for 3mm id, 9mm wide idler pulleys (T16's)
All mechanical components (Rods, Bearings, x carriage) are transferred from startt printer.
Motor mounting screws need to be min 17mm long
You will need additional M4 x18 (can be longer) cap screw and nut for tensioner
In some cases slightly longer belt will be required (depends on how your original one was cut)
Print Settings
Printer:
Startt
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
30%
Category: 3D Printer Parts