AirPods Pro XL sleeves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Extend the AirPods Pro (Gen 2) L sized silicone tip one bit further to fit larger ear cavities.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 1322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small collar for the AirPods Pro (Gen 2) silicon ear tips to make a size L a bit larger and stiffer to make a more snug fit for larger ear cavities.
The earbuds should still fit in the case (just a bit more tightly).
I printed mine with PLA and a .8 nozzle in vase mode.
Versions:
- 2 walls of .4mm (no vase mode)
- 1 wall of .4mm vase mode
To install turn the top of the silicon tip inside out and bunch it up to push it through from the side with the bigger hole. Turn the tip back to normal and snap it back onto the AirPod. This should add about .5 to 1mm which was enough for my ears.