Watering can
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Watering pot for roughly 1 litre.
- Ocena
- 5 / 5
- Polubienia
- 54
- Pobrania
- 264
- Wydruki
- 5
- Wyświetlenia
- 1443
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
The pot just fits into the printing area of a MK2/3. I've printed it on my trusty old MK2/MMU1 using 3 colours and settings that make a sturdy print. Print times can be reduced depending of the settings. No supports required. I've used PLA and it's water tight.
Update 25.12.2022:
It has been brought to my attention that the feet and the base are apparently not on the same level. I'm not quite sure what happened as they are on the same level in the model and I didn't have the problem, but the STL does exhibit it. As I don't have the slicer project any more I've used to print this on my old MK2/MMU1, I've created a new project for a MK3/MMU2S (Kanne_filament_change_tbd.3mf) that has the model correctly placed in the printing room. The only thing left to do is to add height range modifiers to change the extruder according to your own liking.