Frame for Prusa PEI Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As I got my hands on a 10th anniversary pei plate I knew I had to make something special for it!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 274
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a frame to keep the 10th anniversary in a safe place but display it at the same time.
The moment I had it in hand i knew what I had to do.
I went to the next IKEA for the frame and got some other stuff by hand, mainly:
- 1pcs IKEA Sannahed (35cmx35cm)
- 8pcs M3x12 Screw DIN912
- 4 CNC Kitchen M3 threaded inserts
8-15 6x3mm magnets - 1 Wemos D1 Mini
- 24 WS2812 (less or more deepending on the stripe you got by hand)
- some wires
The assembly process is straight forwared:
Print the parts (printed the feets without bottom and top layers).
4 screws from the outside fix the octo ring, 4 from the inside fix the feets.
Wire +/-/d to the wemos and your done after glueing them to the ring.
I chose wled as firmware for my moodlight but you are free to choose what ever you want.
Here are two very colorful impressions I was able to capture with the frame, but there are a lot more than that in wled. 
I would like to see more Plates nicely stored. So leave a make here if you decide to store your plate also framed.