Linear Pull Snap Lock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This simple part is a quick disconnect snap lock for attaching two tethered/tied lines together.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 74
- Wydruki
- 2
- Wyświetlenia
- 814
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This simple part is a quick disconnect snap lock for attaching two tethered/tied lines together. Mount or tie one permanetly and enables a quick disconnect/reconnect for anything tied to the other side.
Use to quickly tie down items in a vehicle or to hang things in a garge. They can also be used in household organization and simple storage.
There are no female / male versions of the part. Simply print 2 and they will fit together. When printed in a similar manner as described, the parts should snap together with about 8 kg of force for the first snap, and will wear in to about 3kg of force after extended use.
When printed in my setup with Prusament PETG, the parts were able to withstand >68kg of linear pull force in the snap direction, but please test your parts yourself and use at your own discrection. I would never rely on these ties in a saftety critical manner.
Not Perfect but Perfectly Good