1 / 3
Housing for ftdi ft232rl usb-seriell converter (YP-05)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a housing for a usb-serial converter I recommend ISO7380 M3x6mm screws, but the print also provides clip-in…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 358
- Wydruki
- 2
- Wyświetlenia
- 1655
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (20)Powiązane
this is a housing for a usb-serial converter
I recommend ISO7380 M3x6mm screws, but the print also provides clip-in without screws
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0,2mm
Infill:
20%
Filament:
Generic PLA
Notes:
- print upper side with support if you like you can omit the screws and leave the support inside, just using the provided clip-in mechanism
Category: Computer
