1 / 3
Squash ball feet for Prusa i3 mk3s - Slotted — zdjęcie 1
1 / 3

Squash ball feet for Prusa i3 mk3s - Slotted

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of a very good idea, added a slot in the model so it would be easier to install the 3030 T-Nuts

Ocena
5 / 5
Polubienia
6
Pobrania
41
Wydruki
1
Wyświetlenia
595
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I took the great model that Yosuke built and just added a 5.1mm slot to the inside so it would be easy to install the feet with t-nuts for the 3030 extrusion. 

The same settings from Yosuke I am very sure would work but I personally printed the feet out with a 0.6 nozzle and did 3 vertical shells just to add additional strength in matching Prusament Orange PLA. 

I also added the 0.4 nozzle print file just in case anyone wanted it - 3 vertical shells were also used for additional strength.