1 / 6
Neti Bottle Cap — zdjęcie 1
1 / 6

Neti Bottle Cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,72 € – 0,89 € netto (bez VAT)

Dla pliku: neti_bottle_cap-r1.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,80 € netto (środek widełek).

Masa podana przez autora
6 g
Czas druku podany przez autora
1 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

The Neti Bottle Cap lets you turn a regular plastic beverage bottle into a neti pot for nasal rinsing and irrigation…

Ocena
5 / 5
Polubienia
33
Pobrania
423
Wydruki
2
Wyświetlenia
2490
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

The Neti Bottle Cap lets you turn a regular plastic beverage bottle into a neti pot for nasal rinsing and irrigation with lukewarm salt water.

During the COVID-19 pandemic there's been a lot of talk of hand hygiene. However, nasal hygiene is not getting much attention—even when one of the main ways of getting infected is through the respiratory system

Using a neti pot for nasal hygiene is an old Indian tradition that has served me well for alleviating allergies, flus, and colds. See https://en.wikipedia.org/wiki/Nasal_irrigation.

My dad and I both find this new design superior to the traditional neti pot designs because you get a better flow of water through the nasal cavities and it's easier to pour the saline solution due to the ergonomics.

The two measuring cups on the sides of the cap are for measuring salt to mix isotonic salt water that is tolerated by our noses. The big one is for 300 ml of water; the small one for 100 ml.

There are two indents on the snorkel to help you shorten it if your bottle cannot accommodate the full length.

It was a fun process iterating through experiments and prototypes to arrive at the final design as illustrated on the photo.

Patent Pending

Print instructions

  • Slice without support if you are doing you own slicing. The design has been optimized for that to save filament.
  • Filament of your choosing. I use PLA.
  • if necessary, the two parts of the Neti Bottle Cap may be glued together to create a tight seal.

Tagi