1 / 2
Arduino Nano 33 IoT Case with Tie Warp Holes — zdjęcie 1
1 / 2

Arduino Nano 33 IoT Case with Tie Warp Holes

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Secure the Arduino Nano 33 IoT to anything tie wraps

Ocena
0 / 5
Polubienia
7
Pobrania
173
Wydruki
0
Wyświetlenia
1295
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

This case was designed to be tie wrapped to an object in order to take IMU readings.

Also has a hole so that the reset button can be pressed.

The cap is held in place by the USB cable or you can add a dab of hot glue.

Arduino slides in on the rails, fits up to 6mm tie wraps.

 

Tagi