1 / 4
Pimoroni Enviro+ Environment Monitor housing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to print housing designed to hold the Pimoroni Enviro+ hat and Raspberry Pi Zero
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 561
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (19)Powiązane
Housing to hold the Pimoroni Enviro+ as well as the particle detector.
The housing has recesses for 3mm x 1mm magnets to hold the backplate in place.