Maker Select v2/Wanhao Duplicator i3 v2 RAMPS 1.4 and MOSFET Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix from https://www.thingiverse.com/thing:2374376, which provides M5 bolt holes. This version makes the following…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 289
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Remix from https://www.thingiverse.com/thing:2374376, which provides M5 bolt holes. This version makes the following changes:
- Mounting holes are sized for M3 screws (at least M3x8) to attach to the frame of a Maker Select v2/Wanhao Duplicator i3 v2. Requires M3 nuts on the other side of the frame to attach
- Fixed the MOSFET screw holes so they all print smoothly
- Added insets for the nuts on the AT2560 board mount to match those on the MOSFET board mount
Tinkercad available here: https://www.tinkercad.com/things/gFzUXqfMBum-maker-select-v2-ramps-14-and-mosfet-mount/edit?sharecode=UFOvt-EGhu0nxCR_G9DA0xLjPiWLMfc4qLFpNGXNFuA
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10%
Filament: Overture PLA Silk Neon Green Post-Printing =============
Make sure to clear excess filament from the screw holes before sliding in nuts for attachment.
Category: 3D Printer Parts