Versaflo mask to CPAP hose adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an adapter which will allow you to attach a standard CPAP hose to a Versaflo M-200 mask (I'm guessing it will…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 402
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is an adapter which will allow you to attach a standard CPAP hose to a Versaflo M-200 mask (I'm guessing it will also fit other Versaflo models, but the only one I have is an M-200).
The tolerances are pretty tight (intentionally, since this is an air hose connector after all) once I get it snapped on, I pretty much have to cut it off to remove it (there are some internal latches around the top rim that "hook" around the plastic ring on the mask and lock it into place). This also means you might have to play with scaling to adjust for differences in printer tolerances.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Yes
Supports:
No
Resolution:
200
Infill:
15
Filament: Prusa PLA Azure Blue
Notes:
I had to use rafts on mine because the "inner ring" kept breaking lose from the print bed while printing... if you don't have issues with small-surface-area bed adhesion, you could certainly print without rafts.
Category: Parts