FLSUN QQ-(S) stock LCD remount.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the FLSUN QQ-(S) BigTreeTech TFT24-V1.1 or TFT35 V3.0 or TFT35 E3 V3 Screen mount by 3Deddy for the stock…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 339
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remix of the FLSUN QQ-(S) BigTreeTech TFT24-V1.1 or TFT35 V3.0 or TFT35 E3 V3 Screen mount by 3Deddy for the stock QQ-(S) LCD screen. In fact 3Deddy did the remix and I just did the printing, testing and fitting. See https://www.thingiverse.com/3deddy/designs as he is a great designer.
LCD was moved off center as the stock LCD ribbon cable is to short. If I was to do it again I would order a longer ribbon cable but it does work just fine.
Print Settings
Printer Brand:
Anycubic
Printer:
Semi-closed 4Max
Rafts:
No
Supports:
No
Infill:
20
Filament:
Local Ukraine PLA
red
Notes:
Used PrusaSlicer and painted on supports where needed.
Category: 3D Printer Parts