Kica Jetfan (Battery-Powered Duster) Holder/Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a holder for the Kica JetFan battery-powered duster. It is made to accept mounting screws up to 5mm in…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 919
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a holder for the Kica JetFan battery-powered duster. It is made to accept mounting screws up to 5mm in diameter or zip ties like I have done.
The design is primarily focused on holding and keeping the jetfan from spinning around freely.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
Any
Infill:
20%Filament: Prusament PETG
Notes:
If you want the strongest holding force, I suggest making the infill 100% about 3 layers from the top of the actual mount (where the verticle back tab meets the rest of the object). The process for doing so is different in all printing software.
Category: Tool Holders & Boxes