ESD Wrist Strap Under-Desk Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an under the desk attachment for ESD wrist straps. You will need a banana female jack to finish this design. I…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is an under the desk attachment for ESD wrist straps. You will need a banana female jack to finish this design.
I created this cause ESD Hubs cost $20+ online.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.20mm for good detail; .30mm+ for fast print
Infill:
5% Grid, Honeycomb, Rect.
Filament:
Any Any
Notes:
I suggest setting top and bottom layers to 4, and walls to 4.
For correct sizing of Banana Female Jack
You will need to drill out a bigger hole depending on the size of your binding post. I left it relatively small so you can make it to your own specs.
To mount with screws
To mount with screws you will need to drill your own holes.
Category: Electronics