1 / 10
Z brace frame support CR6 ender 3 Vyper CR10 aluminum extrusion — zdjęcie 1
1 / 10

Z brace frame support CR6 ender 3 Vyper CR10 aluminum extrusion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Z brace specifically designed for the CR6 with clearances in mind. Can be used on any aluminum extrusion printer…

Ocena
0 / 5
Polubienia
11
Pobrania
50
Wydruki
0
Wyświetlenia
855
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Z brace specifically designed for the CR6 with clearances in mind. Can be used on any aluminum extrusion printer style, mounted in the back or in the front (more common for more angle). Can by used with any round tube by changing the size of the adapter hole. Clamp on force by tightening the screw prevents it from moving.

I print with nylon because it's great for functional parts, but it's more difficult to print with larger pieces such as the Brace_top due to warping. But the parts can be printed in anything, higher temp material such as petg or abs if used in an enclosure.

Needed a frame brace for mounting my spool holder on top of the frame.

Print Settings

Printer:

CR6 se

Rafts:

No

Supports:

No

Resolution:

.16mm-.20mm

Infill:

16% triangle with 150% flowrate for infill

Filament:

Any Any


Notes:

All the screws,washer, & nuts are M5. Will need some M5 slide T nuts.

Category: 3D Printer Parts

Tagi