Mega i3 dual Z axis belt tensioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple belt tensioner for the mega i3 dual Z leadscrews. I know that the mega i3 has independent dual Z axis, but I've…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 314
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple belt tensioner for the mega i3 dual Z leadscrews. I know that the mega i3 has independent dual Z axis, but I've converted mine to using only one because I like having to adjust just one endstop switch instead of two to set my Z offset.
The belt is an open end held together by two small zip ties, so I don't know the actual diameter of it. Seems to work just fine.
This really isn't an upgrade for the mega i3, unless you wanted a belt to sync the leadscrews. Will need to edit the marlin firmware as well.
Edit: I realized that one endstop switch can be split to both Z1 and Z2 endstop inputs, so you can do a dual Z sync belt without having to edit the firmware.
Category: 3D Printer Parts