HeadsUp 2207 Soft Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Soft mount for the HeadsUp 2207 (i.e. Freedom Spec) motors. The fit is very close, but has just a bit extra material…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 103
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Soft mount for the HeadsUp 2207 (i.e. Freedom Spec) motors. The fit is very close, but has just a bit extra material in the thin parts between the bolt holes so it prints batter and is more durable. May work with other 16mm BCD motors, but also might not. Trim excess after mounting if using arms with only three bolt holes.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.15mm
Infill:
100%
Filament: any TPU any
Notes:
Can be ironed or not, resize Z to get desired amount of layers (2 layers is what I use). Works well with high wall count to get 100% infill, and a decent skirt line count to get quality flow on this small/thin part.
Category: R/C Vehicles