1 / 3
Tattu 1400 6S LiPo Butt and Kidney Guard — zdjęcie 1
1 / 3

Tattu 1400 6S LiPo Butt and Kidney Guard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a TPU guard for a 6S Tattu 1400mAH LiPo battery, weighs about 12.5 grams, and it may* help protect from sticks…

Ocena
0 / 5
Polubienia
3
Pobrania
28
Wydruki
0
Wyświetlenia
246
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

This is a TPU guard for a 6S Tattu 1400mAH LiPo battery, weighs about 12.5 grams, and it may* help protect from sticks or other sharp objects poking a nice hole in one or more of your cells during your frequent crashes!

The dimensions are set up for a Diatone Roma with two straps, but it could work on plenty of other quads, provided you have your straps in a similar spot. Cut to preference, or stop the print early if you really know what you are doing.

If people like this, I may do some slight variations as requested, and feel free to remix however you want, just don't let me see this on some drop shipping website in a month.

8/5/2022: Added version for a single strap, with the battery mounted in the middle of the frame. This one has a thin support wall that must be trimmed before use.

*No guarantees, as always!

Print Settings

Printer:

any

Rafts:

No

Supports:

No

Resolution:

0.2mm

Infill:

100%

Filament:

any TPU

any


Notes:

Get 100% infill by setting a really high wall line count (50 should do it) to maximize strength over traditional infill.

Custom Section

Category: R/C Vehicles

Tagi