Conga 3090 motor belt replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After having issues with the center brush, I realized that it was working using a rubber belt and after two years of…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
After having issues with the center brush, I realized that it was working using a rubber belt and after two years of daily usage, It seems to suffer a lot of wear, ending in a non-functional brush.
Perhaps I'm not a fan of rubber belts, I decided to switch the first gear.
It makes a bit more noise, but it lasts much longer than the previous belt.
Thanks to Cecotec, I learned about gears, Fusion 360, and also aboutplanned obsolescence
IMPORTANT
I printed it scaling it to 98%, was the best fit in my case, but you can play scaling it a bit to match your printer characteristics.
It also requires switching the polarity of the motor!
Print Settings
Printer:
P3Steel
Rafts:
No
Supports:
No
Resolution:
0.20
Infill:
20%
Filament:
eSun PLA
White
Category: Other