Hotwheels Toyota GR Supra Pandem (Greddy Theme)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The display design is based on the livery of the Pandem Supra from Slide Street set.
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 1527
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Any suggestion is welcomed! Feel free to join my Facebook group to let me know what you want: https://www.facebook.com/groups/1115757609295068
Custom display base are also available from $5! Contact me to discuss what you want!
If you like my work, you can support me Printables Clubs! Just click the “Support & Join” button beside my name or here: https://www.printables.com/@GigaPenguin#join:279
Exclusive models are included too!
You can also support me through Patreon too: https://www.patreon.com/gigapenguin3dprints/posts
Description
The display will fit all Hotwheels release of the same casting. It is not tested with the other Supra casting, if you want the base to fit that casting please send me the dimensions indicated here: https://imgur.com/5T6mb2L
The display base is separated into 2 parts for easy printing and colour swap. The parts are:
1) Base
-BaseV2.STL
2) Base back wall:
-BoxBackV4.STL
Print Settings
Nozzle size = 0.3 mm (0.4 should be printable but smaller better)
Layer height = 0.2 mm
Filament change layer for colours on "BaseV2":
1) Start (Back part stripe colour and "G" background colour, mine is in black)
2) Layer 9 (Front part stripe colour and "R" background colour, mine is in red)
3) Layer 14 (Overall base colour and "GR" lettering colour, mine is in white)
4) Layer 26 ("Supra" lettering colour, mine is in black)
Filament change layer for colours on "BoxBackV4":
1) Start (Background of the wall, mine is in white)
2) Layer 9 (Bottom stripe colour and "Greddy" outline colour, mine is in red)
3) Layer 14 (Top stripe colour and "Greddy" lettering colour, mine is in black)
Assembly
The car is tied by wires through the hole in the base
Back plate should slide in nicely into the display base.
Others
Feel free to send me any feedback on how to improve the design. Suggestion on display base designs are welcomed too.
I can be contacted through Instagram or Twitter too:
Facebook: https://www.facebook.com/groups/1115757609295068
Twitter: https://twitter.com/Giga_Penguin
Instagram: https://www.instagram.com/GigaPenguin3DPrinting/