Sonos Roam Bed / Board Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Sonos Roam Bed / Board Mount
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
The SONOS Roam is by far the best speaker to have in a kid's room (especially when you already have a Sonos system). Taking the speaker into the bed allows the creation of cozy sound “capsules” instead of having a speaker screaming from far away from the other side of the room. The problem with just putting it into the bed: The off switch on the back is very easy to press and it happened a lot to us, that the Roam was accidentally turned off just by some movement.
So I remixed this mount I found here and just added some simple brackets to put this mount onto the side of the kid's beds. Works perfectly and can easily be placed on every side.
I printed it in PETG to make it more durable for kids' hands ;) PLA should work as well.
Unfortunately, the design needs support while printing. I printed it standing upwards.
The attached file is for boards with a width of 30mm but you can easily adjust this by just pulling the inner sides of the brackets to fit smaller boards. Give it some play of 0.5mm.