Holder for Nintendo Switch Steelbook Cases
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to hold Steelbook cases for Nintendo Switch games. Lets you display them in a vertical column on the wall. I…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bracket to hold Steelbook cases for Nintendo Switch games. Lets you display them in a vertical column on the wall.
I used toothpicks through the holes to join them in a line, with a bit of hot glue in the area as well. I used some 18mm ceramic magnets I had from a previous project (https://www.amazon.ca/dp/B07MMLPPC1) and I used hot glue on the back of the magnets in the holes to help hold them in place. I tried making the holes smaller to just pressure fit them in, but it took a bit too much pressing to make that work.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.28
Infill:
20%
Filament: Eryone PLA Matte Red
Notes:
Used Filament Friday Extra Fast profile (https://thangs.com/designer/CHEP/3d-model/Filament%20Friday%20Extra%20Fast%20Cura%20Profile-56518) Took about 1 hour per display to print. Printed 2 at the same time in just over 2 hours.
Category: Decor