Controller Module Holder for Medisana HB 675 Heated Blanket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder to reduce the chance of breaking the controller module and make it easier to access.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 308
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I'm mainly using the Medisana HB 675 XXL heated blanket on my desk chair. Since the controller module is dangling from one of the corners of the heated blanket, it was a hassle to change the heating level. It also posed a risk of being stepped on or dropping it to the floor after adjusting the level. So I decided to create a small holder, which can be attached to your chair with a couple of zip ties.
Printed in eSUN PETG white on the Prusa Mini+ with the 0.20mm QUALITY profile in Prusa Slicer with the following additional settings: 3 perimeters, 15% gyroid infill, no brim, no supports.