1 / 4
Anti-vibration z-tops for Prusa MK3(S+) — zdjęcie 1
1 / 4

Anti-vibration z-tops for Prusa MK3(S+)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Modified z-tops version closing the gap between z-top and z-rod, holding the z-rod in place to reduce vibrations

Ocena
4,857 / 5
Polubienia
46
Pobrania
280
Wydruki
7
Wyświetlenia
1607
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

Installing the original z-top parts will result in some clearance between the z-top and the z-rod (2.4mm to be exact).
This could (happened to only one of my printers) cause wobble or vibrations (or rather annoying vibration sounds) as the z-rod can “freely” move/vibrate without the z-top holding it in place. 

To work against this problem I extruded the respective face on the z-top model and added an extra 1mm so the z-top will be pressed down onto the z-rod once the screws are tightened. 

This simple “mod” got rid of the vibrations I experienced.

Special thanks to

DeadCatAlive for providing the presentation shot! ♥

Tagi