Unifi Flex Mini Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple wall mount for Unifi's Flex Mini.
- Ocena
- 4,636 / 5
- Polubienia
- 114
- Pobrania
- 1070
- Wydruki
- 13
- Wyświetlenia
- 4455
- Oceny
- 11
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
Thank you for supporting me!
This is another free 3D model made available for you. I love sharing my models, but designing, testing, polishing, uploading and maintaining them is a lot of work. In case you enjoy this model, please leave a small Donation or Buy me a Coffee. Thank you!
Design
The mount is a single body print with an approximate print time of 1 hour. The Unifi switch is mounted with connector pointing to the left / right. I have chosen this orientation to protect the sockets against dust but allow watching the LEDs nevertheless.
Printing
Good with standard settings 0.2mm layer height and 0.4mm nozzle. Used for indoor use, PLA is just fine. Can be printed without support. Although printing the mount with the back / wall side down, I recommend to print it with the side down. This is to make sure the top / bottom brackets do not break when bend.
Additional parts required
- 2 x 4-5mm screws
- or double-sided tape