1 / 4
D20 plant pot with tray (icosahedron pot)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of my D20 bin (icosahedron bin), to be a plant pot with a tray
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (32)Powiązane
Description:
A remix of my D20 bin with a drainage hole and a tray. The tray has an indentation that’s slightly larger then the base of the pot for a better fit into the tray.
Printing:
This example was printed in FormFutura rPLA, however I will be printing one in PETG and share the results as that would be a better material for a plant pot. Pot is little over 23 hours to print with a .40mm nozzle at .20 layer height. The tray at the same settings it just shy of 4 hours.