Martian 2 low profile mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modified the martian 2 220mm frame so that it has a lower profile. The file "martian-2-hd-cam-mount-mirrored.stl" is…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I modified the martian 2 220mm frame so that it has a lower profile. The file "martian-2-hd-cam-mount-mirrored.stl" is only needed if you would like to mount a gopro session or runcam 3 hd on it. The camera cage is designed to hold a runcam swift 2. The camera angle can be adjusted. Be aware that because of the low profile it is going to be a tight build and you probably cannot fit more than one thing onto the main stack. In addition to the printed parts you also need the following:
6 x 20mm Spacer
3 x 28mm Spacer
Please note that i don't know how break proof it is in hard crashes. Use it at your own risk.
Update: i uploaded a new version of the HD cam mount ("martian-2-hd-cam-mount-v2-mirrored.stl") which is more stable.
Category: Hobby