Bicopter / Twincopter / Dualcopter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New design, use the default PID, Very easy to fly even flip, much easier than the singlecopter.…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 1312
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
New design, use the default PID, Very easy to fly even flip, much easier than the singlecopter.
(http://www.thingiverse.com/thing:1555053) https://www.youtube.com/watch?v=vbzvSiuaxHQ
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Notes:
I printed all parts in ABS, 0.2mm layers with 15% infill, 3 shells and 3 top/bottom layers.
Post-Printing
BOM
4x M3x8 Nylon Threaded Spacers
12x M3x10 Nylon Threaded Spacers
4x M3x17 Nylon Threaded Spacers
4x M3x25 Nylon Threaded Spacers
4x M2 Self Tapping Screws
2x paper clips
4x ez connectors
//Different sizes depending on your electronic components.//
4x 2.5x70mm Carbon Fiber Rods
4x 2.5x110mm Carbon Fiber Rods
2x 4.5g servos (25mm mounting)
2x 12A ESC
1x FC Any support BICOPTER, (30.5mm mounting) Multiwii is recommended.
2x 2204 2300kv motors
1x 3S 1300~3S2200mah
2x 5045
1x RX
How I Designed This
Easy to print, easy to assemble, easy to repair, easy to fly and safe of course.
Category: R/C Vehicles