1 / 2
FGC68-MKI UNW163 227, 300 SLIM shroud set for your magfed paintball marker — zdjęcie 1
1 / 2

FGC68-MKI UNW163 227, 300 SLIM shroud set for your magfed paintball marker

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

the UNW slim shrouds for the FGC68MKI

Ocena
0 / 5
Polubienia
7
Pobrania
46
Wydruki
0
Wyświetlenia
373
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

this is the shroud set is based on the FGC-9 MKI shroud models. but these are modded to accept paintball barrels. in this collection is a set of different shrouds. in STL and STEP format, so you can customise the look of your marker.

to complete this build do you need to use the FGC-68 set and part of the FGC-9 and parts of the Tippmann Tipx marker

the starter set for the FGC68 can be found here:

https://www.printables.com/model/87803-fgc-68-base-package-starter-set-for-tipx-tcr-magfe

MKII upper TOP rail version (normal MKII version)

https://www.printables.com/model/87752-fgc-68-mkii-upper-set


the MKII low rail uppers can be found here:
https://www.printables.com/model/177737-fgc-68-mkii-low-rail-upper-set


this low rail right is the same hight as for the new FGC9/FGC6 MKI/MKII rails that I have made.

the FGC68 MKI low rail was in a different hight.

for now the low rail shrouds are a bit limited in there options. but this will chance later in this year. for both the FGC68, FGC6 and FGC9

in case you don’t want to wait of manual update a already printed shroud just fallow the steps in this video.
https://www.youtube.com/watch?v=480iDroe8h0
https://www.printables.com/model/176422-unw-fgc9-fgc6-fgc68-mkii-diy-low-rail-on-unw-shrou

materials needed:
for the front of the shroud
1x M3 bolt 20mm long or up to 26mm

for on the top rail UNW163
2x M3 bolt 20mm long

for on the top rail UNW227
3x M3 bolt 20mm long

for on the top rail UNW300
4x M3 bolt 20mm long
 

Tagi