Flared Radiator Section for USA Trains SD70MAC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flared radiator section for USA Trains SD70.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 1407
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Flared radiator section for USA Trains SD70MAC. This is style found on the later units with 4,300 horsepower. No body modification needed as this will slip over the existing air intake louvers however in order for this to sit flush, you will need to pry off the long grab bar and cut off the retaining clips to re-use the existing fans.
Note: You will need to print (4) or the louver part.
NOTE: I PUT MUCH TIME AND EFFORT INTO DRAWING PARTS AND SHARE FILES FOR FELLOW MODEL TRAIN HOBBYISTS TO PRINT FOR THEMSELVES AND SHARE WITH FRIENDS. PLEASE DO NOT SEEK PROFIT FROM MY DESIGNS. FOR THOSE LOOKING FOR SOMEONE TO PRINT THIS, KNOW THAT THE MATERIAL COST IS ABOUT $3.50.