1 / 2
FGC9-MKI UNW163 SLIM shroud or for the FGC6 MKI
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 piece shroud design
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 259
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (15)Powiązane
this my latest shroud design and maybe even my last for the FGC lineup. but I have thought this before so who knows.
the 2 piece design makes it possible to make it less bulky then the older designs.
and the M-lok gives you a lot of options for mounting things
for the barrel? you can use the ECM v3 set that can be found here https://odysee.com/@c0ld_d8rk_h8nd:8/ECM-Barrels-v3.5:e
materials needed:
for the front of the shroud
1x M3 bolt 20mm long or up to 26mm
for on the top rail
2x M3 bolt 20mm long