AnyCubic i3 Mega Pro SD Card Continuity Clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This clamp solved issues with my anycubic mega pro SD card disconnecting midprint, or not showing files at all.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 490
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I was having issues with my anycubic mega pro SD card disconnecting midprint, or not showing files. Forums helped me get files to show sometimes once I shortened the file names but still needed to wiggle the card. Electronics contact cleaner and checking the ribbon cable didn't do it either
Turns out a little bit of pressure of the right part of the SD reader's metal casing did just the trick
Had trouble locating the spot. Using ZIP tie to shim under the printer plate. Hopefully this isn't needed in all cases, give it a shot!
Hope this saves you the $12 of buying a new ribbon cable SD reader