1 / 4
USA 3-hole | 15mm | flare | face shield - Large Pegs + Lower 3 Hole + Comfort Strap — zdjęcie 1
1 / 4

USA 3-hole | 15mm | flare | face shield - Large Pegs + Lower 3 Hole + Comfort Strap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I modified VerticalDocs face shield to include Octagonal pins that are fatter and more spread out.

Ocena
0 / 5
Polubienia
2
Pobrania
54
Wydruki
0
Wyświetlenia
377
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I modified VerticalDocs face shield to include Octagonal pins that are fatter and more spread out. This anchors the plastic in very firmly.

Sliced and diced the model to create the lower support with the same exact mounting method.

To assemble, simply 3 hole punch both sides of the paper.

Files:
ShieldV4 This is the modified VerticalDocs shield
LowerV1 This is the lower support
ComfortStrapV6R2 This is my original Comfortable strap

This file contains everything in one build. 1HR39Min.
StupidFast_ShieldV4_LowerV1_ComfortStrapV6R2.3mf

Also included is my original Comfort Strap.
Various m3f files are included ranging from full prints, to single files. Two types of straps are included. The other strap I included is just an 80% scaled strap in the Y that I found some place, if it is yours let me know so I can give you credit.

I will include all the original files I have to keep this open source.
https://www.dropbox.com/s/lqgweqlqvag5q0k/AXG6800_SourceFiles.zip?dl=0

Print instructions

I have included several print files that print very quickly. Note that different parts and pads use different infills. I have gone through great pains to get these to print extremely quickly and reliably., try it first before you modify the settings.